Print Size & DPI Calculator
Convert pixels to print size or inches and centimeters to pixels. Check resolution, cropping, and the file dimensions your print needs.
What do you need to find?
Target print
Your print options
Full image at 300 PPI
20 × 13.33 in
Maximum dimensions at this density with no crop or upsampling.
Pixels needed for the target print
3,000 × 2,400 px
10 × 8 in at 300 PPI · 7.2 megapixels
Available resolution when filling the print
500 PPI
24 MP source · Enough pixels for the target PPI.
Image area cropped to fill
16.67%
Fill crops the image to the paper ratio. Fit keeps the whole image and leaves borders; neither choice stretches it.
Calculated without bleed or printer margins. Pixel requirements round up to whole pixels. Sharpness, noise, focus, paper, and viewing distance also affect the finished print.
Pixels, PPI, and printer DPI
Print size in inches = pixels ÷ PPI. To work in the other direction, multiply inches by PPI; divide centimeters by 2.54 first. A 6,000 × 4,000 pixel image prints at 20 × 13.33 inches at 300 PPI without cropping.
PPI describes image pixels per printed inch. Printer DPI describes the device’s ink or toner dots. A printer may use many dots to reproduce a single image pixel, so entering a printer’s 1,200 DPI specification as an image PPI target is usually the wrong calculation.
Worked examples: crop, fit, and export
- 8 × 10 inches at 300 PPI: export 2,400 × 3,000 pixels in portrait orientation. A 3:2 image loses about 16.67% of its area when cropped to 4:5; inspect the subject placement first.
- 30 × 20 cm at 300 PPI: allow 3,544 × 2,363 pixels after rounding up. Confirm whether your lab needs bleed or a particular crop.
- 30 × 20 inch wall print: a 6,000 × 4,000 image provides 200 PPI. It may work well from farther away, but a proof is more useful than a universal quality label.
Changing a file’s PPI metadata without resampling changes its suggested physical size, not its pixel detail. Use the Lightroom export guide to turn these dimensions into a delivery preset.
Choose resolution for the viewing distance
For photographs viewed close up, 240–300 PPI is a useful starting range. Larger wall prints viewed farther away can be acceptable at lower densities such as 150–200 PPI. These are planning ranges, not guarantees; the lab’s requirements and a real proof should decide the output.
A crisp source at 200 PPI can look better than a blurred source enlarged to 300 PPI. Check focus, sharpening, and crop before enlarging. If the aspect ratios differ, choose a deliberate crop or borders rather than stretching the image.
Browse all photography tools →